Aerial photography has come a long way since its inception. In the early days, photographers…
Drone ESC
Best Drone ESC - Electronic Speed Controllers from BLHeli and more
Updated 2024-04-18 at 20:10
Hey drone lover, go ahead and have a look at the Top 10 Best Drone ESC below. ESC is an acronym for Electronic Speed Controllers. In essence they are electronic chips that help control the speed and sometimes direction of the motor of remote controlled quadcopters.
You require different ampere ESC for different drones and different sizes of propeller blades. It is important to choose the right ESC for your drone, which means you need to look at the Thrust Data Table of the motor of your drone.
Some of the best drones already come with ESC from BLHeli, which is a top maker of ESC. It would be good if you also opt for this brand.
Before you choose an ESC for your drone, you need to know the maximum amperes of your motor and choose an ESC that has an amperage slightly higher than it.
If your drone motor has maximum 20 ampere, then you should choose an ESC of around 22 to 24 ampere. That gives the ESC some leeway, as feeding too high amperes into a ESC can cause it to heat up and sometimes even burn up.
It is better to play safe and get a slightly higher ampere ESC. However do note that the ESC ampereage should only be only slightly more, as every ampere added to the ESC increases its weight and cost.
The drone ESC listed below are the latest bestsellers, and they are tried and tested. You can have a look at these ESC options and ensure that your drone or drone kit is compatible and go for it.
It is a very good idea to get all the specifications and the Thrust Data Table of the motor so that you are absolutely sure of the ESC you are buying.
Go ahead and choose the best Drone ESC.
Flying a drone is an incredible experience, whether a toy drone, a racing drone or a professional HD video drone like a DJI, so enjoy it thoroughly. If you love to be out there flying drones, you will love the Top 10 in American Outdoors and American Outdoor Sports.
Go get them Drone ESC already!
1.
4Pcs 20A ESC Brushless Electronic Speed Controller DSHOT BLHeli_S 2-4S Lipo for FPV QAV Drone Multirotor Quadcopter
- 20A ESC Brushless DSHOT BLHeli_S 2-4S Lipos Electronic Speed Controller for FPV QAV Drone Multirotor Quadcopter
- With BLHeli_S firmware, easy to upgrade or flash via the esc signal cable;The throttle signal cable is twisted pair, which effectively reduces the crosstalk caused by signal transmission..
- The applicable number of battery cells :2-4S;The original components are used to ensure the high-quality current capability of the ESC..
- It is optimized for multi-axis and supports fixed-wing and helicopters well.
- The throttle range can be set to be compatible with different receivers, with a smooth and delicate speed control feel.
2.
4PCS 35A ESC 2S-6S Lipo BLHeli_S Electronic Speed Controller Support Dshot 150/300 / 600 Brushless ESC for FPV Racing Drone Multicopter...
- The hardware pulse width modulation is turned on by default, and the damped light hardware drives the motor, with low noise and better response. Plus smoothing.
- Integrate rgb multi-color bright Ed night light, flying at night is more cool. Natively support BLHeli-S, support the new DShot150/300/600 digital throttle, strong anti-interference ability, fast response
- Using 6 layers, 3 ounces thickness copper high-quality PCB, hierarchical layout of high current and small control signals, enhance the anti-interference ability. There is also a gold plating process on the PCB surface, which effectively improves the current resistance and heat dissipation capacity of the ESC
- Small size and light weight for easy installation;BLHeli_S is designed for superior performance in multirotors, and uses hardware.
- Support to use Dshot600/300/125, PWM throttle signal mode (1000μs-2000μs), Onshot125 (125-250μs), Oneshot42 (42-82μs) and Multishot (2-25μs).
3.
HGLRC 4PCS 30A ESC 3S 4S 5S ESC BLHeli_S Electronic Speed Controller Support Dshot 150/300 / 600 Brushless ESC for FPV Racing Drone...
- Strong current endurance: Steady Input voltage 3S 4S 5S Lipo battery in Continuous current current 30A, max spoort to 40A(in 10s)
- Supported Protocols: Analog Signals - Multishot, One shot 42, Oneshot125, Digital Signals - Dshot 150, 300, 600
- Stable firmware: BLheli_S 16.5 is designed for superior performance in multirotors, and uses hardware upgradable
- Use top quality components: Imported Japanese Toshiba MOSFETs and Japanese Murata Ceramic Capacitors.3oz High-TG PCB board significantly reduces electrical heat soak and improves system efficiency
- Ultra-Small and Light footprint: 2g weight 26*14.5mm ESC with the Silicone Signal and Power Wires provides high heat-resistance and more flexibility
4.
SpeedyBee F405 V3 Flight Controller Stack:30x30 Bluetooth Stack with 4in1 50A ESC Board,Wireless Betaflight...
- [Configure your FC and ESC via BT]: With the SpeedyBee app, turn your phone into an all-in-one configurator and tune your quad anytime, anywhere. Enjoy the easy way to fly with fully configuring your FC ESC wirelessly.
- [Powerful 50A 4-in-1 ESC]: Built with the robust BB21 MCU and large motor pads for easy soldering. Built with Japan-made filtering SMT capacitors +onboard TVS protective diode, brings a smooth flight experience.Real 50A output, ready for your baddest 6S motors.
- [Onboard Battery Life Indicator]: Built with a 4-level LED battery indicator, now you can fly anywhere worry-free - even without your lipo checker!
- [Change Motor Directions Wirelessly]: Finishing your latest build? Just replaced your motor after a crash? Take your smartphone out, and configure your motor direction wirelessly with the latest SpeedyBee app. Works for all BLHeli32 / BLHeli_S / BlueJay ESCs.
- [4 sets of LED Pads with Simple Switching]: Need more visibility at night? Just solder up your LED strips and blaze the darkest trail you can find. With just one tap on the BOOT button, you can cycle through all different LED presets and pick the one you love!
5.
HGLRC Zeus 45A V2 3-6S BL_S Electronic Speed Controller ESC with for FPV Racing Drone Freestyle Quadcopter
- 【High-performance hardware】Adopt STM32F051 32-bit high-performance processor, running frequency up to 48MHZ, stable 45A, peak 55A, fast calculation speed, smoother control, better hand feeling and faster response speed
- 【Brand new structure】New structure for control circuit and output circuit
- 【First choice for FPV】Large MOSFET small size board, 20x20 mounting holes, is the first choice for racing, freestyle
- 【Immersion gold high process design】Temperature and flow resistance, support return motor speed, current, temperature data
- 【Why Choose Us 】 We are the Original HGLRC manufactory , If there are any question or need any help , pls feel free contact us , we will always here help you out within 24 hours . Choose us risk free today 🙂
6.
Readytosky 30A ESC 2-6S OPTO Brushless Electronic Speed Controller for F450 S500 ZD550 RC Helicopter Quadcopter(4PCS)
- ★30A OPTO 2-6S Brushless electronic speed controller.
- ★Highly intelligent, adaptive ability, extremely easy to use;
- ★Continuous Current: 30A Weight: 28.5g.
- ★Specifically optimized firmware ESC, the ESC has a very good compatibility.
7.
HAWK'S WORK Brushless ESC, 4 Pcs Super Light & Small Size 20A Electric Speed Controller for Multi-Rotor Drone RC Airplane (Original)
- SUPER LIGHT & SMALL SIZE - Save weight and space for your devices and significantly improve motor speed control for your drone or fixed-wing.
- PRE-SOLDERED or NOT - You can choose pre soldered version with XT60 and 3.5mm bullet plugs.
- RELIABLE 20A ESC - Suitable for most drones and fixed wing models. LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells.
- PROTECTIONS - Includes start-up protection, overload protection, low battery protection, loss of throttle signal protection, blocked rotation protection, overheat protection.
- PROGRAMMABLE - With BLHeli_S firmware, easy to upgrade or setup via programming card.
8.
Readytosky 35A ESC 2-6S Brushless ESC Lipo BLHeli_S Brushless Electronic Speed Controller Support D-Shot 150/300/600 for FPV Drone RC...
- Using the latest EFM8BB21F16G high speed control chip. By default, the hardware for PWM is turned on and the Damped Light hardware for PWM drives the motor. The noise is low and the throttle response is smoother.
- The ESC supports BLHeli-S and DShot 150/300/600 digital throttle. It has strong anti-interference ability and fast response capability.
- A 6-layer, 3-ounce copper-thick and high-quality for PCB is adopted, and the layered layout of large current and small control signal is adopted to Enhance the anti-interference ability. The gold plating process on for PCB surface can effectively improve the current resistance and heat dissipation ability of ESC.
- Integrated for RGB multi-color bright LED night light, night flight is even more dazzling.
- Damped Light mode, regenerative braking function, make motor deceleration more sensitive and effective, control more precise; Active continuous current technology, so that the battery recovery power, prolong the duration.
9.
T-motor V45A V2 4IN1 6S 32BIT ESC Electronic Speed Control for FPV RC Racing Drone Motor
- Outstanding quality but expensive? We did it both this time! No matter in racing court or in nature, every pilot can enjoy the fun in flight.
- Not just pretty look, performance is the king. Adhering T-MOTOR consistent superior quality, full range of escs adopt high-performance premium MOS, now V45A V2 MOS is upgrade again with 15% performance improvement, no fear for high current shock; F0 high-speed processor matching with orignial BLheli32 firmware, you will get the smoothest flight experience you never had before.
- Integrating 10V/2A BEC then providing reliable electric power safeguard for DJI HD VTX and other equipment; Optimizing motor pad safety distance effectively protect components, easier soldering.
- Brand-new cooling fin design makes heat dissipation more efficiently and guarantee stable power output.
- Via design for motor pad makes over-current ability stronger and welding easier.
Sale
10.
4 in 1 45A ESC, 45A 2‑6S ESC with Double Hole Spacing RC Drone Quadcopter Electronic Speed Controller
- Double Hole Spacing Design : Integrate 4 high-performance 45A ESCs with double hole spacing design. With such a high degree of integration, the volume is only the same size as that of a flat knitting machine, and the installation and wiring will become very simple. This incredible size and volume is designed for racing traversers.
- PCB Production Process : EMF8BB21F16G main control chip, operating frequency up to 48MHz, three-in-one IC driver, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pads are edged by metallization, which can prevent the pads from falling off during use. 3 oz copper thick, six-layer board, greatly reduces heat, thus increasing efficiency.
- Anti-Jamming and Fast Response : Not only supports normal PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra-high-speed throttle signals, but also supports the latest dshot 150, 300, 600 digital throttle anti-jamming and fast response. The input and output lines are made of soft silicone wire, which is very durable, high temperature resistance, and easy to solder.
- Feature-Rich : Using BLHeli‑S firmware, it has powerful performance and rich functions, supports multiple ways to set ESC parameters, or upgrade ESC firmware (such as through the throttle signal line, using other development boards, or using cleanflight or for setting or upgrading Betaflight firmware for ESC).
- Low Noise : PWM hardware drives the motor, with low noise and smoother throttle response. Damped Light technology and regenerative braking function make motor deceleration more responsive and effective, and control more accurate. Active recharge technology allows the battery to restore power and extend the sailing time.
Last update on 2024-04-17 at 11:24 / Affiliate links / Images from Amazon Product Advertising API
Your thirst for everything drone-worthy not yet quenched? Explore the planet’s biggest store –
Related Posts
